Skip to main content

AWS ECR scanner reference for STO

You can scan your container images using Amazon Elastic Container Registry (ECR).

Important notes for running AWS ECR scans in STO​

Docker-in-Docker requirements​

The following use cases require a Docker-in-Docker background step in your pipeline:

  • Container image scans on Kubernetes and Docker build infrastructures
  • Security steps (not step palettes) on Kubernetes and Docker build infrastructures
    • Required for all target types and Orchestration/DataLoad modes

The following use cases do not require Docker-in-Docker:

Set up a Docker-in-Docker background step

  1. Go to the stage where you want to run the scan.

  2. In Overview, add the shared path /var/run.

  3. In Execution, do the following:

    1. Click Add Step and then choose Background.

    2. Configure the Background step as follows:

      1. Dependency Name = dind

      2. Container Registry = The Docker connector to download the DinD image. If you don't have one defined, go to Docker connector settings reference.

      3. Image = docker:dind

      4. Under Entry Point, add the following: dockerd

        In most cases, using dockerd is a faster and more secure way to set up the background step. For more information, go to the TLS section in the Docker quick reference.

      If the DinD service doesn't start with dockerd, clear the Entry Point field and then run the pipeline again. This starts the service with the default entry point.

      1. Under Optional Configuration, select the Privileged checkbox.
Configure the background step

Root access requirements​

You need to run the scan step with root access if either of the following apply:

note

You can set up your STO scan images and pipelines to run scans as non-root and establish trust for your own proxies using self-signed certificates. For more information, go to Configure STO to Download Images from a Private Registry.

For more information​

The following topics contain useful information for setting up scanner integrations in STO:

AWS ECR step settings for STO scans​

The recommended workflow is add an AWS ECR step to a Security Tests or CI Build stage and then configure it as described below.

Scan​

Scan Mode​

Scan Configuration​

The predefined configuration to use for the scan. All scan steps have at least one configuration.

Target​

Type​

  • Container Image Scan the layers, libraries, and packages in a container image.

Name​

The identifier for the target, such as codebaseAlpha or jsmith/myalphaservice. Descriptive target names make it much easier to navigate your scan data in the STO UI.

It is good practice to specify a baseline for every target.

Variant​

The identifier for the specific variant to scan. This is usually the branch name, image tag, or product version. Harness maintains a historical trend for each variant.

Container image​

Type (orchestration)​

The registry type where the image is stored:

Domain (extraction)​

The URL of the artifact repository that contains the image to scan. Examples include:

  • docker.io
  • app.harness.io/registry
  • us-east1-docker.pkg.dev
  • us.gcr.io

Name​

The image name. For non-local images, you also need to specify the image repository. Example: jsmith/myalphaservice

Tag​

The image tag. Examples: latest, 1.2.3

Region​

The region where the image to scan is located, as defined by the cloud provider such as AWS.

Authentication​

Access ID (orchestration)​

The username to log in to the scanner.

Access Token​

The access token to log in to the scanner. In most cases this is a password or an API key.

You should create a Harness text secret with your encrypted token and reference the secret using the format <+secrets.getValue("project.my-access-token")>. For more information, go to Add and Reference Text Secrets.

Access Region​

The AWS region of the image to scan.

Log Level, CLI flags, and Fail on Severity​

Log Level​

The minimum severity of the messages you want to include in your scan logs. You can specify one of the following:

  • DEBUG
  • INFO
  • WARNING
  • ERROR

Fail on Severity​

Every Security step has a Fail on Severity setting. If the scan finds any vulnerability with the specified severity level or higher, the pipeline fails automatically. You can specify one of the following:

  • CRITICAL
  • HIGH
  • MEDIUM
  • LOW
  • INFO
  • NONE — Do not fail on severity

The YAML definition looks like this: fail_on_severity : critical # | high | medium | low | info | none

Additional Configuration​

In the Additional Configuration settings, you can use the following options:

Advanced settings​

In the Advanced settings, you can use the following options:

Security step settings for AWS ECR scans in STO (legacy)​

note

You can set up ECR scans using a Security step, but this is a legacy functionality. Harness recommends that you use an AWS ECR step instead.

  • product_name = aws-ecr
  • scan_type =containerImage
  • policy_type= dataLoad, ingestionOnly
  • product_config_name =default
  • container_project = The name of the scanned ECR container with the results you want to ingest.
  • container_tag = The container tag for the given container project.
  • configuration_access_id = Your AWS Access ID secret
  • configuration_access_token = Your AWS Access Token secret
  • configuration_region = The AWS region where the container is located. For example, us-east-1
  • container_domain = URI of the ECR container with the scan results you want to load.
  • fail_on_severity - See Fail on Severity.

Target and variant​

The following settings are required for every Security step:

  • target_name A user-defined label for the code repository, container, application, or configuration to scan.
  • variant A user-defined label for the branch, tag, or other target variant to scan.
note

Make sure that you give unique, descriptive names for the target and variant. This makes navigating your scan results in the STO UI much easier.

You can see the target name, type, and variant in the Test Targets UI:

Target name, type, and branch

For more information, go to Targets, baselines, and variants in STO.

Container settings​

The following settings apply to all scanners where the scan_type is containerImage.

  • container_type
    • accepted value(s): local_image, docker_v2, jfrog_artifactory, aws_ecr
      • for container_type set to local
        • None
      • for container_type set to docker_v2
        • container_access_id: Username
        • container_access_token: Password/Token
      • for container_type set to jfrog_artifactory
        • container_access_id: Username
        • container_access_token: Password/Token
      • for container_type set to aws_ecr
        • container_access_id: Username
        • container_access_token: Password/Token
        • container_region: AWS default region
  • container_domain

Ingestion file​

If the policy_type is ingestionOnly:

  • ingestion_file = The path to your scan results when running an Ingestion scan, for example /shared/scan_results/myscan.latest.sarif.

  • The data file must be in a supported format for the scanner.

  • The data file must be accessible to the scan step. It's good practice to save your results files to a shared path in your stage. In the visual editor, go to the stage where you're running the scan. Then go to Overview > Shared Paths. You can also add the path to the YAML stage definition like this:

        - stage:
          spec:
            sharedPaths:
              - /shared/scan_results

Fail on Severity​

Every Security step has a Fail on Severity setting. If the scan finds any vulnerability with the specified severity level or higher, the pipeline fails automatically. You can specify one of the following:

  • CRITICAL
  • HIGH
  • MEDIUM
  • LOW
  • INFO
  • NONE — Do not fail on severity

The YAML definition looks like this: fail_on_severity : critical # | high | medium | low | info | none